Description
Black PLA+ made for parts that work as hard as they look. The modified formula produces noticeably tougher, less brittle parts than standard PLA, while the deep black finish hides layer lines for a clean, professional look. It keeps the beginner-friendly printing experience — no heated chamber, minimal warping, low odor.
Why choose this filament
- Tougher, less brittle parts than standard PLA
- Deep uniform black — hides layer lines for a professional finish
- Prints as easily as regular PLA
- Batch-tested and vacuum-sealed with desiccant
Specifications
| Material | PLA+ (toughened PLA) |
| Diameter | 1.75 mm (±0.02 mm) |
| Net weight | 1 kg |
| Density | 1.24 g/cm³ |
| Melt flow index | 6–8 g/10 min (190 °C, 2.16 kg) |
| Nozzle temperature | 200–230 °C |
| Bed temperature | 50–60 °C |
| Print speed | 40–100 mm/s |
| Recommended layer height | 0.2 mm |
| Vicat softening point | 58 °C |
| Tensile strength | 48 MPa |
| Elongation at break | 10% |
| Flexural strength | 78 MPa |
| Flexural modulus | 2800 MPa |
| Packaging | Vacuum-sealed spool + desiccant |
Printing Tips for PLA+
The toughened formula prints with the same ease as standard PLA but tolerates a wider window. Run 210–220 °C with a 60 °C bed: the higher end of the range improves layer bonding, and better layer bonding is what turns extra toughness into real impact resistance in the finished part. Cooling behaves like PLA — full fan after the first layer, no enclosure required.
- For load-bearing parts use 0.2 mm layers, 3 perimeters and 40–60% infill
- Hold speeds at 40–80 mm/s; the modified polymer prefers a steady, even flow
- Brass nozzles are fine — the material carries no abrasive additives
Storage and Batch Quality
Toughened PLA+ still benefits from dry storage. Keep unopened spools sealed with the supplied desiccant, and if a spool has sat open in humid air for weeks, dry it at 45–50 °C for 4–6 hours before printing. Diameter is measured across the full spool at ±0.02 mm, every batch is 100% mechanically wound and tangle-checked, then vacuum-sealed with desiccant — the same spool-to-spool consistency whether you order 5 kg or 500 kg.
Applications: machine parts, brackets and mounts, tool handles, enclosures, everyday functional prints.
Looking for custom colors, private label, or bulk pricing? Contact us for a factory-direct quote.
Reviews
There are no reviews yet.