Description
Bright pink PLA+ that pairs a bold, cheerful color with real durability. The toughened formula resists drops and cracks far better than standard PLA, making it ideal for toys, gifts, and lifestyle prints that get handled every day. It keeps the beginner-friendly printing experience — no heated chamber, minimal warping, low odor.
Why choose this filament
- Tougher, less brittle parts than standard PLA
- Bright pink — a bold, cheerful shade that stands out
- Prints as easily as regular PLA
- Batch-tested and vacuum-sealed with desiccant
Specifications
| Material | PLA+ (toughened PLA) |
| Diameter | 1.75 mm (±0.02 mm) |
| Net weight | 1 kg |
| Density | 1.24 g/cm³ |
| Melt flow index | 6–8 g/10 min (190 °C, 2.16 kg) |
| Nozzle temperature | 200–230 °C |
| Bed temperature | 50–60 °C |
| Print speed | 40–100 mm/s |
| Recommended layer height | 0.2 mm |
| Vicat softening point | 58 °C |
| Tensile strength | 48 MPa |
| Elongation at break | 10% |
| Flexural strength | 78 MPa |
| Flexural modulus | 2800 MPa |
| Packaging | Vacuum-sealed spool + desiccant |
Printing Tips for PLA+
The toughened formula prints with the same ease as standard PLA but tolerates a wider window. Run 210–220 °C with a 60 °C bed: the higher end of the range improves layer bonding, and better layer bonding is what turns extra toughness into real impact resistance in the finished part. Cooling behaves like PLA — full fan after the first layer, no enclosure required.
- For load-bearing parts use 0.2 mm layers, 3 perimeters and 40–60% infill
- Hold speeds at 40–80 mm/s; the modified polymer prefers a steady, even flow
- Brass nozzles are fine — the material carries no abrasive additives
Storage and Batch Quality
Toughened PLA+ still benefits from dry storage. Keep unopened spools sealed with the supplied desiccant, and if a spool has sat open in humid air for weeks, dry it at 45–50 °C for 4–6 hours before printing. Diameter is measured across the full spool at ±0.02 mm, every batch is 100% mechanically wound and tangle-checked, then vacuum-sealed with desiccant — the same spool-to-spool consistency whether you order 5 kg or 500 kg.
Applications: toys and gifts, phone stands and holders, cosplay props, lifestyle products.
Looking for custom colors, private label, or bulk pricing? Contact us for a factory-direct quote.
Reviews
There are no reviews yet.