1kg spool of orange PLA+ 3D printing filament

Orange PLA+ filament used in a 3D printing project, scene 1

Orange PLA+ filament used in a 3D printing project, scene 2

Orange PLA+ filament used in a 3D printing project, scene 3

Orange PLA+ filament used in a 3D printing project, scene 4

Orange PLA+ filament used in a 3D printing project, scene 5

Orange PLA+ filament used in a 3D printing project, scene 6

Orange PLA+ Filament 1.75mm – 1kg Impact-Resistant

Name: Orange PLA+ Filament 1.75mm – 1kg Impact-Resistant
Brand: Suirun

Vivid orange PLA+ that resists cracks and daily wear — prints that stand out and hold up.

– Diameter: 1.75 mm, tolerance ±0.02 mm
– Nozzle temp: 200–230 °C · Bed: 50–60 °C
– 1 kg vacuum-sealed spool with desiccant
– OEM colors and private label available

INQUIRE NOW

Description
Reviews (0)

Description

Vivid orange PLA+ for parts that need to be seen and survive real use. The toughened formula resists drops and cracks far better than standard PLA, while the bold orange finish stays uniform across batches. It keeps the beginner-friendly printing experience — no heated chamber, minimal warping, low odor.

Why choose this filament

Tougher, less brittle parts than standard PLA
Vivid orange — high visibility for tools, markers and hobby parts
Prints as easily as regular PLA
Batch-tested and vacuum-sealed with desiccant

Specifications

Material	PLA+ (toughened PLA)
Diameter	1.75 mm (±0.02 mm)
Net weight	1 kg
Density	1.24 g/cm³
Melt flow index	6–8 g/10 min (190 °C, 2.16 kg)
Nozzle temperature	200–230 °C
Bed temperature	50–60 °C
Print speed	40–100 mm/s
Recommended layer height	0.2 mm
Vicat softening point	58 °C
Tensile strength	48 MPa
Elongation at break	10%
Flexural strength	78 MPa
Flexural modulus	2800 MPa
Packaging	Vacuum-sealed spool + desiccant

Printing Tips for PLA+

The toughened formula prints with the same ease as standard PLA but tolerates a wider window. Run 210–220 °C with a 60 °C bed: the higher end of the range improves layer bonding, and better layer bonding is what turns extra toughness into real impact resistance in the finished part. Cooling behaves like PLA — full fan after the first layer, no enclosure required.

For load-bearing parts use 0.2 mm layers, 3 perimeters and 40–60% infill
Hold speeds at 40–80 mm/s; the modified polymer prefers a steady, even flow
Brass nozzles are fine — the material carries no abrasive additives

Storage and Batch Quality

Toughened PLA+ still benefits from dry storage. Keep unopened spools sealed with the supplied desiccant, and if a spool has sat open in humid air for weeks, dry it at 45–50 °C for 4–6 hours before printing. Diameter is measured across the full spool at ±0.02 mm, every batch is 100% mechanically wound and tangle-checked, then vacuum-sealed with desiccant — the same spool-to-spool consistency whether you order 5 kg or 500 kg.

Applications: tools and tool handles, signage and markers, RC models and hobby parts, cosplay props.

Looking for custom colors, private label, or bulk pricing? Contact us for a factory-direct quote.