Description
Blue-green-gold silk PLA is the showpiece of the silk line. Three silky tones flow into one another as the print grows, producing an iridescent, peacock-like sheen that makes vases, awards, and display pieces look professionally finished straight off the printer. Prints as easily as standard PLA — for the best shine, print slightly slower than usual.
Why choose this filament
- Shiny silk finish with an iridescent, luxurious sheen
- Multi-tone gradient shifts naturally — no painting needed
- Prints as easily as regular PLA
- Batch-tested and vacuum-sealed with desiccant
Specifications
| Material | PLA Silk (dual-color) |
| Diameter | 1.75 mm (±0.02 mm) |
| Net weight | 1 kg |
| Density | 1.24 g/cm³ |
| Melt flow index | 6–8 g/10 min (190 °C, 2.16 kg) |
| Nozzle temperature | 200–230 °C |
| Bed temperature | 50–60 °C |
| Print speed | 30–60 mm/s |
| Recommended layer height | 0.2 mm |
| Vicat softening point | 58 °C |
| Tensile strength | 45 MPa |
| Elongation at break | 8% |
| Flexural strength | 75 MPa |
| Flexural modulus | 2800 MPa |
| Packaging | Vacuum-sealed spool + desiccant |
Printing Tips for PLA Silk
Silk PLA shows its best surface quality at lower speeds — the pearly sheen comes from the way the polymer flows, and rushing the print dulls it. Run the nozzle at 210–220 °C and the bed at 55–60 °C, and hold speeds around 30–50 mm/s. Keep cooling moderate: too much airflow freezes the surface before the gradient has a chance to blend smoothly.
- Slower prints shinier — 30–50 mm/s gives the deepest, most even luster
- A slightly higher nozzle temperature (210–220 °C) smooths the surface finish
- Avoid walls thinner than 0.8 mm; the dual-color effect needs material depth to show
Storage and Batch Quality
Silk PLA draws its shine from the base polymer, so moisture is the enemy of the finish — wet filament prints dull and bubbly. Keep spools sealed with desiccant and dry an opened spool at 45–50 °C for 4–6 hours before a display-grade print. Your spool arrives mechanically wound, tangle-checked, measured across the full length at ±0.02 mm and vacuum-sealed the day it is produced.
Applications: awards and trophies, vases, luxury home decor, cosplay pieces, display models.
Looking for custom colors, private label, or bulk pricing? Contact us for a factory-direct quote.
Reviews
There are no reviews yet.